All conveyor belts must be connected into a ring before they can be used, so the quality of the conveyor belt splice directly affects the service life of the conveyor belt and whether the conveyor line can run smoothly and smoothly. Generally, the common methods of conveyor belt joints include mechanical joints, cold bonded joints, hot vulcanized joints, etc.
Conveyor belt mechanical joint method: generally refers to the use of belt buckle joint, this joint method is convenient and convenient, and it is relatively economical, but the efficiency of the joint is low, easy to damage, and has a certain impact on the service life of conveyor belt products. In PVC and PVG full-core flame retardant and antistatic conveyor belt joints, this joint method is generally used for products below grade 8 belts.
Conveyor belt cold-bonded joint method: that is, the cold-bonded adhesive is used to make the joint. This joint method is more efficient than mechanical joints, and it is more economical, and it should be able to have a better joint effect, but from a practical point of view, because the process conditions are difficult to master, and the quality of the adhesive has a great impact on the joint, so it is not very stable.
Conveyor belt hot vulcanized splice method: It has been proved to be the most ideal splice method, which can ensure high splice efficiency, but also very stable, and the splice life is also very long, easy to master. However, there are disadvantages such as process trouble, high cost, and long joint time.