Synchronous belt drive is widely used in CNC machine tools, automotive industry and high-speed equipment, in the process of using synchronous belt, there will be synchronous belt wear, synchronous belt transmission manufacturers to share with you a few synchronous belt wear treatment methods, I hope to help you.
1. Some hot vulcanization skills
The vulcanizing machine is used for hot vulcanization, and the hot vulcanization technology can restore the function of the conveyor belt for the part of the joint that is partially worn, and the effect is better.
The disadvantage is that the investment of manpower and material resources is large, and it is only suitable for the treatment of the part that is smaller than the outer surface volume of the vulcanized plate, and it is very difficult to deal with large-area wear.
2. Some cold vulcanization skills
After grinding the worn parts, the cold vulcanized rubber is evenly applied to the worn surface of the belt after being harmonized in proportion.
The disadvantage is that the curing time is long, and the cleaning effect is not good after the cleaner is put in.
3. Some cold sticking skills
Generally, imported repair strips are selected, which have wear resistance and good reinforcement function, and cannot be restored to the appearance of the original conveyor belt, and the cleaning effect of the cleaner is not good. However, with regard to the high equipment utilization situation, the limitation of cold effective expansion of vulcanization technology.