1. Even if the equipment is stopped when the motor is overheated.
If you find that the synchronous pulley motor is overheated when you are using the equipment, you should stop running the equipment even to avoid small problems causing major equipment failures.
2. Inspect the relevant parts of the timing pulley.
Through understanding, we can know that the main reasons why the pulley motor will overheat in the application are that the specific gravity of the medium is greater than the motor, the packing gland is too firm, the assembly quality of the pump is not good, and the connection between the wheel and the shaft is poor. When this phenomenon occurs in the motor, you should check these four parts in time to find the cause of the problem.
3. Solve the problem in a corresponding way.
There are different solutions to the overheating phenomenon of the synchronous pulley motor caused by different reasons, such as the overheating phenomenon caused by the specific gravity of the medium is greater than that of the motor, which can be solved by replacing the applicable motor. Therefore, after confirming the cause of the problem, you need to adopt the corresponding method to solve the problem.