During transportation and storage, the conveyor belt should be kept clean to avoid direct sunlight or rain and snow soaking, prevent contact with acids, alkalis, oils, organic solvents and other substances, and be one meter away from the heating device.
The temperature of the warehouse should be kept between 18-40 °C and the relative humidity should be kept between 50-80% during storage.
During storage, the conveyor belt must be placed in rolls, not folded, and should be turned once a quarter during the placement period.
Conveyor belts of different types and specifications should not be used together, and their joints should be glued together.
The type, structure, specification and number of layers of the conveyor belt should be reasonably selected according to the use conditions.
The running speed of the conveyor belt should not be greater than 2.5 m/s, and the materials with large blockiness and high wear and the use of fixed unloading devices should be as low as possible.
The relationship between the diameter of the transmission pulley of the conveyor and the cloth layer of the conveyor belt, the matching of the transmission pulley and the reversing pulley, and the requirements for the groove angle of the roller should be reasonably selected according to the design regulations of the conveyor.
The feeding direction should follow the running direction of the conveyor belt, and a chute should be used to reduce the impact on the conveyor belt when the material falls, so as to reduce the falling distance of the material; The receiving section of the conveyor belt should shorten the spacing of the rollers and use the buffer roller as the leakage, and the belt should be compliant with a soft and moderate baffle plate, so as to avoid the baffle plate being too hard and scratching the belt surface of the conveyor belt.